Home > Support > Forum

"No Images Loaded"

Posted by henda79 
"No Images Loaded"
January 19, 2012 03:35AM
I have added a WaitCursor to a Windows form and set the FullScreenMode:Mode property to NONE.

When I run the project my form is taken over by the WaitCursor and shows "No Images Loaded" through the middle even though the WaitCursor shows ok where I placed it with no problems.

Whats going on ?
Re: "No Images Loaded"
January 19, 2012 08:16AM
Hello Henda79,

did you put images into Images TImage Collection (accessed through Images property) ?

Best regards
Vladimir Gregor
Bee Mobile | Skype ID: beemobile_support | Phone: +421 94 88 99 22 9 | Email: support at beemobile4 dot net
Re: "No Images Loaded"
January 19, 2012 08:35AM
I added the images via the design time editor.
Re: "No Images Loaded"
January 24, 2012 05:30PM
Have you found the problem ?

I post 5 days ago but no response.
Re: "No Images Loaded"
January 25, 2012 09:08AM
Hello Henda79,

did you set either of these properties for each of your TImage objects?
    [*] ImageFromFile
    [*] ImageFromResx

Best regards
Vladimir Gregor
Bee Mobile | Skype ID: beemobile_support | Phone: +421 94 88 99 22 9 | Email: support at beemobile4 dot net
Re: "No Images Loaded"
January 25, 2012 09:10AM
Also, does the sample project here work for you?
http://beemobile4.net/products/ipack/controls/waitcursor/project-samples

Best regards
Vladimir Gregor
Bee Mobile | Skype ID: beemobile_support | Phone: +421 94 88 99 22 9 | Email: support at beemobile4 dot net
Re: "No Images Loaded"
May 29, 2012 06:58AM
Dear Gregor

I've the same problem.

I copy the example to my project, and the images are not (you see the cursor change in size but not the image).

Can you give me any advice.

Best Regards,

Jose.-
Re: "No Images Loaded"
May 29, 2012 09:40AM
Hello Jose,

do you use the latest version of WaitCursor v3.5.0.2?

There is a new designer that should help you to adjust images.

If it did not help you, please send me your sample project to find out what is wrong.
Thank you!

Best regards,
Gabriel
the BeeMobile team
Re: "No Images Loaded"
May 29, 2012 09:49AM
Dear Gregor,
Yes, I use the least version of WaitCursor. I programed it through the designer view.
Regards, Jose
Re: "No Images Loaded"
June 04, 2012 07:26AM
Hello,

attached is a sample project that works properly on my WinCE.
Please feel free to modify it to meet your settings.

Thank you!

Best regards,
Gabriel
the BeeMobile team
Attachments:
open | download - WaitCursorTest.zip (78 KB)
Re: "No Images Loaded"
June 04, 2012 07:29AM
Hi Gabriel

Thanks for your help, I'll try it.

Regards, Jose.-
Sorry, only registered users may post in this forum.

Click here to login